JEREPET Aquarium Return Pump, 2250 GPH 24V with Controller and Adjustable Flow

JEREPET 2250GPH Aquarium 24V DC Return Pump is a submersible pump for aquarium and water-feature use, combining 75W power with a maximum flow of 2250GPH (8500LPH).

• Six adjustable speed settings from 30% to 100% — set the water flow to suit your setup.
• 10-minute feeding mode — pause flow during feeding.
• Wave maker function — choose an additional flow mode from the controller.
• Noise level below 30 dBA — supports quieter pump operation.
• Automatic shutoff if the pump runs dry or becomes blocked — adds protection in those conditions.

Use this return pump when you need to move water in an aquarium system or another listed water application. Its freshwater and marine-water compatibility makes it suitable for different aquarium environments, while its stated uses also include fountains, hydroponics, waterfalls and ponds. The pump is intended to operate submerged; the controller panel has a separate environmental limitation to keep in mind.

What flow and lift can this pump provide?

JEREPET’s maximum flow is 2250GPH (8500LPH), with a maximum lift of 18 ft (5.49 m). The maximum-flow figure applies when using the largest nozzle at 0 ft (0 m) lift, so it describes flow under that specific condition. The pump measures 8.3 × 4.1 × 5.2 inches (21.08 × 10.41 × 13.21 cm); compare those dimensions with the available space in your setup.

• Power: 75W.
• Supply: DC 24V.

Where can I use the JEREPET aquarium return pump?

JEREPET’s pump can be used in freshwater or saltwater aquarium and sump setups, as well as for fountains, hydroponics, waterfalls and ponds. It is designed for submerged use, making it a fit for applications where the pump operates underwater. Its controller panel is not waterproof, so outdoor use requires protection from rain and other exposure.

• Compatible water types: freshwater and marine water.
• For outdoor setups, protect the controller panel with rainproof measures.

How do the controller and pump protection work?

The controller provides six speed choices that adjust flow from 30% to 100% of maximum flow. It also offers a 10-minute feeding mode and a wave maker function. A sealed impeller and ceramic shaft support the pump’s operation at a noise level below 30 dBA.

• The pump automatically shuts off if it runs dry or becomes blocked.
• The controller panel itself is not waterproof.

This pump is suited to aquarium keepers and water-feature users who need a controllable, submersible pump for freshwater or marine water, with additional uses in fountains, hydroponics, waterfalls and ponds. Its DC controller combines adjustable flow with feeding and wave maker modes, while the stated maximum lift is 18 ft (5.49 m).

Read our guide: Aquascaping a freshwater tank: substrate, stone, wood and light