AQQA Aquarium Wave Maker DC 12V Circulation Pump with 4-Speed Flow Control

The AQQA Magnetic Wave Maker is a DC 12V aquarium circulation pump designed to create adjustable, wave-like water movement, with four flow speeds from 400–950 GPH.

• Four adjustable speeds — choose a flow level suited to your aquarium and fish or coral care.
• Timed Feeding Mode — pause circulation briefly while food is added, then let the pump resume automatically.
• Magnetic glass mount — position the pump without drilling or relying on suction cups.
• IP68 waterproof rating and ABS construction — use the fully submersible pump in saltwater or freshwater.
• Quiet, low-voltage operation — support ongoing circulation with a DC 12V motor and power use from 3W to 8W.

Water movement helps prevent stagnant areas in an aquarium, supports oxygen levels and filtration efficiency, and moves waste through the tank. The AQQA wave maker is intended for reef and coral aquariums, planted tanks, and large freshwater setups where adjustable circulation can help create natural current. Its controls also provide a short pause for feeding, so circulation does not immediately sweep food away.

How much water flow can the AQQA wave maker provide?

It delivers adjustable flow from 400–950 GPH (1500–3600 L/H) across four speed settings. Use the plus and minus buttons to change the flow, with LED indicators showing the selected setting. The adjustable current is designed to reduce dead zones and water stratification while supporting oxygen levels, filtration efficiency, and waste removal. Reef and coral tanks can use the wave-like movement to provide the natural currents associated with coral care.

• Four settings are adjusted with the plus and minus controls.
• LED indicators identify the selected speed.
• Power consumption ranges from 3W to 8W; the manufacturer states it is up to 50% more efficient than traditional AC pumps.

How does Feeding Mode work?

Press and hold the controller button for 5 seconds to activate Feeding Mode. The pump pauses for 10 seconds, the indicator light turns on, and circulation then resumes automatically. This brief pause is designed to give fish and coral food time to remain in the feeding area rather than being immediately carried away by water movement.

• The mode is activated from the controller.
• Automatic restart means no separate restart action is needed after the pause.

Will the magnetic mount fit my aquarium glass?

The magnetic base attaches to glass up to 3/5 inch thick (1.5 cm). It allows flexible placement, including in aquarium corners, without drilling or suction cups. Before choosing a position, compare your tank glass thickness with the stated limit; the specified mounting surface is glass.

• The pump is positioned using its magnetic mount.
• The mounting system is intended to avoid slipping suction cups and drilling.

Can the pump operate in saltwater, and how should it be started?

Yes. The AQQA pump is fully submersible and intended for both saltwater and freshwater aquariums. Its IP68 waterproof rating and ABS plastic construction are specified for resistance to corrosion and impact. Always submerge the pump in water before switching it on to protect the motor.

• Motor supply: DC 12V.
• Power input: 110–240V, 50–60Hz.
• Operating noise: less than 30dB, with minimal heat generation.

The AQQA Magnetic Wave Maker suits aquarium keepers who want adjustable circulation for reef and coral tanks, planted aquariums, or large freshwater setups, plus a short feeding pause built into the controller. It combines a four-speed, 400–950 GPH flow range with a magnetic mount for glass aquariums up to 3/5 inch thick.

Read our guide: Aquascaping a freshwater tank: substrate, stone, wood and light